category 类别 | trade- mark 牌号 | chemical composition 化学成份(%) | hardness 硬度 | application 用途 |
oxy- acetylene flame spray- using 氧 乙 炔 焰 喷 焊 | f103 | cr10 b1.5 si3 ni rem. | hrc 25 | spray-fusing of cast iron parts, such as die for glass, cylinder, and guide. 铸铁件的喷焊,如玻璃模具,汽缸、导轨 |
f101 | cr10 b2.5 si3 ni rem. | hrc 45 | spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump. 耐磨、耐蚀件的喷焊,如阀门、泵转子、泵柱塞 |
f101fe | cr10 b2.5 si3 fe10 ni rem. | hrc 45 | spray-fusing of corrosion-resistant parts, such as axle and stigma. 耐磨件的喷焊,如轴类、汽门 |
f102 | cr16 b4 si4 ni rem. | hrc 60 | spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston. 耐磨、耐蚀、抗高温氧化工件的喷焊,如模具、柱塞 |
f102fe | cr16 b4 si4 fe15 ni rem. | hrc 60 | spray-fusing of corrosion-resistant parts, such as axle and cold die. 耐磨件的喷焊,如轴类、冷模具 |
f105 | f102+50%wc | hrc 60 | spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan. 抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片 |
f105fe | f102fe+35%wc | hrc 60 | spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan. 抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片 |
f108 | f102+80%wc | hrc 60 | spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger. 抗强烈磨粒磨损,无需加工场合的喷焊,如挖泥船耙齿 |
f301 | cr5 b4 si4 ni30 fe rem. | hrc 45 | spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree. 农机,矿山机械易损件的喷焊,如齿轮,车轴 |
track iron powder 轨铁粉 | cr5 b1.5 si3 ni30 fe rem. | hrc 28 | repair spray-fusing of defects such as scratch and concavity of railroad track. 铁路钢轨擦伤、低塌等缺陷的修复喷焊 |
oxy-acetylene flame spraying 氧 乙 炔 焰 喷 涂 | f111 | cr5 b1.5 si3 ni30 fe rem. | hb 150 | spraying of bearing and cutting parts etc. 轴承、切削件等的喷涂 |
f113 | cr10 b1.5 si3 ni rem. | hb 250 | spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance. 喷涂亦可喷焊,如滚筒、柱塞、耐蚀耐磨轴等 |
f313 | cr15 b1.5 fe rem. | hb 250 | spraying of dryer of papermaking and axle. 造纸烘缸、轴类的喷涂 |
f314 | cr18 ni9 b1.5 fe rem. | hb 250 | spraying of axle. 轴类喷涂 |
f412 | sn10 p0.3 cu rem. | hb 80 | spraying of axle and bearing. 轴、轴承的喷涂 |
f512 | 复合al5ni95 | | backing spray of transition layer between base and working layer. 喷涂层的基体与工作层之间过渡(打底)层用喷涂 |
pta hardfacing 等 离 子 弧 喷 焊 | f221 | cr26 w5 b0.7 co rem. | hrc 43 | pta hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool. 高温高压阀门密封面、热剪切刃口的等离子喷焊 |
f223 | cr21 w5 b1.5 co rem. | hrc 40 | pta hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower. 高温下耐磨耐蚀件的喷焊,如高温高压阀门、鼓风机 |
f321 | cr13 b1.5 si1 fe rem. | hrc 45 | pta hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc. 中温中压阀门的闸板及其他耐磨件的等离子喷焊 |
f322 | cr23 ni13 si5 b1 fe rem. | hrc 40 | pta hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc. 中温中压阀门的阀座及其他耐磨件的等离子喷焊 |
f422 | sn10 p0.3 cu rem. | hb 80 | pta hardfacing of axle and bearing etc. 轴、轴承等离子喷焊 |